PRODUCTSProduct List
Walkie Counterbalanced Stackers
FX series: Compact and easy operation with an excellent functionality.
Various Lineup from 600Kg to 1.5ton.(1500Kg)
A small walkie type that can load/unloaded goods from trucks, load onto shelves, move, and stack goods.
While walking, start, drive and control are electrically powered by the on-board battery. Achieving powerful and smooth operation. Comfortable operation by centralized operation at hand and the operability manipulated freely and supporting the site with excellent safety to prevent accidents.
FX6/FX9-series
Just the right load capacity and size.
Utility type that can be adapted to various usage.
Almost maintenance-free AC motor drive system.
Since no motor brush is used, it is almost maintenance-free. Smooth and powerful driving is possible, and almost no operating noise is generated during driving.
Low-speed rotation is possible to improve work efficiency in narrow spaces.
Even if the work space is small, low-speed turning is possible for easy direction changes. Able to turn in a small radius, realizing light work. Increasing warehouse storage rate and work efficiency.
-
Pinch accident prevention switch
Pinch accident prevention switch reverses the direction of drive if the operator is caught in a wall, goods, etc. Adopting large button and prepare for emergency situation.
-
Easy to use centralized operation
All the driving and lifting switches are concentrated at handle. Adopting a fingertip lever touch knob system makes the work operate easily while holding the handle.
-
Easy to use handle design
Adopting a handle design, easy to operate in any driving or breaking position. Operation without discomfort is possible and driving is safer.
-
cord retractable charger
It can be charged with AC100V power supply. Automatic charger that can charge appropriately according to the remaining battery level. Cord storage type that can be charged anywhere.
-
All models have rubber skirts
The rubber skirt prevents the toes from getting under the vehicle when walking. Increasing safety while maintaining smooth driving.
-
Tilt function
To increase safety during transportation and prevent the pallet from falling, the forks can be tilted slightly backward.
-
Easy to inspect
Adopting a fully open cover. Easy to see and to maintain.
AC motor drive system
Since this motor does not use a motor brush this motor can be used almost maintenance free. In addition, the number of contactors is reduced and there is no operating noise during driving. The control is also wide-ranging, and the performance feeling is improved almost stepless.
Since you can drive in low speed with steering wheel upright, you can change direction with a small turning radius even in a narrow place.
-
If you turn the accelerator knob with pressing the break release button, you can operate at low speed.
- Option
-
- Chime for forwarding
- Back buzzer
- Change fork length
- Fork extension sleeve
- Limit switch for control lifting height
- Step
- Jib Crane
- Change the lifting height
- Without a tilt function
- Change of carry edge and Fork overall width
(Please contact for other modifications)
- Load curve
-
- Dimensions
-
- Specifications
-
Model Unit FX6ST FX6WT FX9ST FX9WT Maximum load kg 600 900 Load centerLC mm 400 Lifting heightFH mm 30～1500 30～2480 30～1530 30～2480 Backward tilt angleθ deg 5 Lifting speed Laden mm/sec 110 95 Unladen mm/sec 160 Driving speed Laden km/h 3.6 3.4 Unladen km/h 4.0 Minimum turning radiusR mm 1150 1295 Overall lengthL mm 2060 2210 Overall widthW mm 870 Overall heightH mm 1960 1725 1975 1725 Overall heightCH mm 2055 3035 2085 3035 WheelbaseWB mm 900 1050 Fork lengthFL mm 850 Fork overall widthFW mm 635～200 Single fork widthF mm 80 Weight kg 870 930 965 1025 Drive wheel mm φ270×101(Made of urethane)×1 Load wheel mm φ150×65(Made of urethane)×2 Battery voltage V 24 Battery capacity Ah/5HR 65 100 Charger Stationary Automatic Type Drive Motor W 1200 Drive control AC control Hydraulic Motor W 2200 Hydraulic control W Lever Control Perpendicular Stowage Passage
(when using 1100×1100mm pallet)mm 2600 2750
FX15WT
Lightly lifting and moving goods more than 1 ton.
Small turn design that helps lift and lower for indoors works.
Flagship model of KOLEC WAKI counter fork lift.
Achieves overwhelming compactness
among the same size
Powerful for moving heavy loads.
Electric cleanness and compact size make this model useful for indoor work.
Powerful support for indoor and outdoor work.
High-power type with fulfilling functions and equipment.
Equipped with fulfilling functions such as power steering that allows light steering operation, speed control function for turning in consideration of small turn and safety.
-
Pinch accident prevention switch
Pinch accident prevention switch reverses the direction of travel if the operator is caught in a wall, goods, etc. Adopting large button and prepare for emergency situation.
-
Easy to use centralized operation
All the driving and lifting switches are concentrated at handle. Adopting a fingertip lever touch knob system makes the work operate easily while holding the handle.
-
Handle shape for ease of use.
Shaped to make driving safer and less stressful. Women can use this model with confidence.
-
All models have rubber skirts
The rubber skirt prevents the toes from getting under the vehicle when walking.
-
Tilt function
Forks can be tilted slightly backward to prevent goods from falling.
-
Operation section on the unit.
Large, easy-to-press emergency stop button, power key, an hour meter and a battery discharge meter are provided.
AC motor drive system
Since this motor does not use a motor brush this motor can be used almost maintenance free.
In addition, the number of contactors is reduced and there is no operating noise during driving.
The control is also wide-ranging, and the performance feeling is improved almost stepless.
Since you can drive in low speed with steering wheel upright, you can change direction with a small turning radius even in a narrow place.
-
If you turn the accelerator knob with pressing the break release button, you can operate at low speed.
Option［FX15WT:Specification change of carry edge and Fork overall width］
Choose from 4 types
(Example: FX15WT Please contact us for each model.)
- Option
-
- Chime for forwarding
- Back buzzer
- Change fork length
- Fork extension sleeve
- Change of carry edge and Fork overall width
- Load curve
-
- Dimensions
-
- Specifications
-
Model Unit FX15WT Maximum load kg 1500 Load centerLC mm 500 Lifting heightFH mm 35～2500 Backward tilt angleθ deg 5 Lifting speed Laden mm/sec 60 Unladen mm/sec 140 Driving speed Laden km/h 3.2 Unladen km/h 3.8 Minimum turning radiusR mm 1380 Overall lengthL mm 2580 Overall widthW mm 890 Overall heightH mm 1825 Overall heightCH mm 3055 WheelbaseWB mm 1120 Fork lengthFL mm 1070 Fork overall widthFW mm 630～270 Single fork widthF mm 100 Weight kg 1800 Drive wheel mm φ245×100(Made of urethane)×1 Load wheel mm φ150×80(Made of urethane)×2 Battery voltage V 24 Battery capacity Ah/5HR 201 Charger Stationary Automatic Type Drive Motor W 1700 Drive control AC control Hydraulic Motor W 2200 Hydraulic control W Knob type chopper control Perpendicular Stowage Passage
(when using 1100×1100mm pallet)mm 2900